FRENES

Porsche Panamera 976 PCD

from 2024
VERIFIED
⌀71.6
PCD5x130
Centre bore71.6 mm
Offset (ET)ET62 to ET64
Fixing typeM14x1.5
Tightening torque160 Nm
Original tyres265/45R19, 295/40R19
Troisième génération (les sources la nomment 972). Turbo E-Hybrid : 275/40R20 9.5Jx20 ET71 et 315/35R20 11.5Jx20 ET68.
Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Porsche Panamera 976

A Porsche Panamera 976 (from 2024) uses a 5x130 PCD and a centre bore of 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x130 required. See all vehicles with 5x130.
  • Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
  • Offset: the original is ET62 to ET64. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 265/45R19, 295/40R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Avant 5x130 71.6 mm 9Jx19 ET64 265/45R19
Arrière 5x130 71.6 mm 10.5Jx19 ET62 295/40R19

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Porsche Panamera 976 without rings. Offset, width, diameter and caliper clearance still need checking.

Porsche 911 992 Turbo from 2020 Porsche Taycan from 2020 Porsche 911 992 Carrera from 2019 Porsche Cayenne 9YA from 2018 Porsche 911 991.2 Carrera 2016–2019 Porsche Panamera 971 2016–2023 Porsche 918 Spyder 2013–2015 Porsche Cayman 981 2013–2016 Porsche Boxster 981 2012–2016 Porsche 911 991 Carrera 2011–2015 Porsche Cayenne 958 2010–2018 Porsche Panamera 2009–2016 Porsche 911 997 GT2 from 2007 Porsche 911 997 GT3 2006–2009 Porsche 911 997 GT3 RS 2006–2009 Porsche 911 997 Turbo 2006–2010

Will wheels from another vehicle fit your Panamera 976?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Porsche Panamera 976?

A Porsche Panamera 976 (from 2024) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Porsche Panamera 976 need a hub centric ring?

The centre bore (hub diameter) of a Porsche Panamera 976 is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Porsche Panamera 976?

The recorded original offset is ET62 to ET64 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Porsche Panamera 976?

The specified tightening torque is 160 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Porsche Panamera 976?

With the same PCD (5x130) and the same centre bore (71.6 mm), these include: Porsche 911 992 Turbo, Porsche Taycan, Porsche 911 992 Carrera, Porsche Cayenne 9YA. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.