FRENES

Fiat Croma PCD

1985–1996
VERIFIED
⌀65.1
PCD5x110 or 4x98
Centre bore58.1 or 65.1 mm
Offset (ET)ET39 to ET41
Fixing typeM12x1.50
Tightening torque120 Nm
Original tyres175/70R14, 205/55R16
⚠ This model comes with 5x110 or 4x98 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 65.1 mm → Wheel spacers 5x110(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Fiat Croma

A Fiat Croma (1985–1996) uses a 5x110 or 4x98 PCD and a centre bore of 58.1 or 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x110 or 4x98 required. See all vehicles with 5x110.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET39 to ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R14, 205/55R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x98 58.1 mm — ET39 175/70R14
Version 2 5x110 65.1 mm — ET41 205/55R16
Version 3 5x110 65.1 mm — ET40 205/55R16

Vehicles with the same PCD and centre bore

Same 5x110 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Fiat Croma without rings. Offset, width, diameter and caliper clearance still need checking.

Fiat 500X from 2014 Alfa Romeo Tonale from 2022 Maserati Grecale from 2022 Alfa Romeo Stelvio from 2017 Opel Adam S from 2015 Jeep Cherokee 2014–2024 Jeep Renegade from 2014 Dodge Dart 2012–2018 Lotus Exige S3 front 2011–2021 Opel Meriva from 2010 Saab 9-3X 2009–2014 Opel Corsa D OPC 2007–2014 Saturn Astra 5 trou 2007–2010 Saturn Aura 2007–2009 Saturn Sky 2007–2010 Jeep Commander 2006–2010

Will wheels from another vehicle fit your Croma?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x110 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Dodge Stratus ⌀57.1

Frequently asked questions

What is the PCD of a Fiat Croma?

A Fiat Croma (1985–1996) can have a 5x110 or 4x98 PCD depending on the version: check on an original wheel.

Does a Fiat Croma need a hub centric ring?

The centre bore (hub diameter) of a Fiat Croma is 58.1 or 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Fiat Croma?

The recorded original offset is ET39 to ET41 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Fiat Croma?

The specified tightening torque is 120 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Fiat Croma?

With the same PCD (5x110) and the same centre bore (65.1 mm), these include: Fiat 500X, Alfa Romeo Tonale, Maserati Grecale, Alfa Romeo Stelvio. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.