Fisker Karma PCD

2011–2013

VERIFIED

Centre bore67 mm

Offset (ET)ET42

Fixing typeEcrous - 14x1.50

Tightening torque190 Nm

Original tyres245/40R21

Hub centric rings 67 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Fisker Karma

A Fisker Karma (2011–2013) uses a 5x130 PCD and a centre bore of 67 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 67 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67 mm.
Offset: the original is ET42. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 190 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/40R21. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Will wheels from another vehicle fit your Karma?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67 mm, and will not fit if it is smaller.

Mercedes G-Classe W465 ⌀84.1 Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Maxus EV80 Plus ⌀78.1 Maxus EV80 Pro ⌀78.1 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6

Frequently asked questions

What is the PCD of a Fisker Karma?

A Fisker Karma (2011–2013) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Fisker Karma need a hub centric ring?

The centre bore (hub diameter) of a Fisker Karma is 67 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Fisker Karma?

The recorded original offset is ET42. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Fisker Karma?

The specified tightening torque is 190 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Fisker models

Ocean 5x114.3 Latigo CS 5x120 Tramonto 5x112 All Fisker →

Does a value look wrong, or is a version missing? Let us know, we check every report.