Ford Cougar PCD

1999–2004

VERIFIED

Centre bore63.4 mm

Offset (ET)ET46

Fixing typeEcrous - 12x1.50

Tightening torque128 Nm

Original tyres195/55R16

Hub centric rings 63.4 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Cougar

A Ford Cougar (1999–2004) uses a 4x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x108 required. See all vehicles with 4x108.
Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
Offset: the original is ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 128 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 195/55R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Cougar without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Fiesta MK8 2017–2023 Ford EcoSport 2014–2023 Ford B Max 2012–2018 Ford Fiesta MK7 2008–2017 Ford Streetka 2003–2006 Ford Focus RS 2002–2003 Ford Focus ST170 2002–2004 Ford Fusion EU 2002–2012 Ford Focus I 1998–2004 Ford Puma (1997) 1997–2001 Ford Ka 1996–2008 Ford Courier 1995–2000 Ford Mondeo ST200 1995–2000 Ford Mondeo 1993–2000 Ford Escort RS Cosworth 1992–1996 Ford Escort Express 1990–1999

Will wheels from another vehicle fit your Cougar?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Ford Cougar?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Ford Fiesta MK7 2008–2017 Wheels from Ford Focus ST170 2002–2004 Wheels from Ford Focus I 1998–2004 Wheels from Ford Puma (1997) 1997–2001

Same PCD, different centre bore

These vehicles also use 4x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 63.4 mm, and will not fit if it is smaller.

Ford Mustang ⌀64.1 Ford Taunus ⌀63.3 Alfa Romeo Junior ⌀65.1 Fiat 600 ⌀65.1 Fiat 600E ⌀65.1 Fiat Topolino ⌀65.1 Jeep Avenger ⌀65.1 Peugeot e-208 ⌀65.1

Frequently asked questions

What is the PCD of a Ford Cougar?

A Ford Cougar (1999–2004) has a PCD of 4x108: 4 studs or bolts spaced around a circle 108 mm in diameter.

Does a Ford Cougar need a hub centric ring?

The centre bore (hub diameter) of a Ford Cougar is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Cougar?

The recorded original offset is ET46. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Cougar?

The specified tightening torque is 128 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Cougar?

With the same PCD (4x108) and the same centre bore (63.4 mm), these include: Ford Fiesta MK8, Ford EcoSport, Ford B Max, Ford Fiesta MK7. Offset, width and rim diameter still need checking for each vehicle.

Other Ford models

Capri 5x112 Explorer EV 5x112 Transit Courier 5x108 Tourneo Courier 5x108 E-Transit 5x160 Mustang Mach-E 5x108 Puma (J2K) 5x108 Kuga III 5x108 Focus IV 5x108 Fiesta MK8 4x108 Tourneo 5x160 EcoSport 4x108 All Ford →

Does a value look wrong, or is a version missing? Let us know, we check every report.