FRENES

Ford Focus ST170 PCD

2002–2004
VERIFIED
⌀63.4
PCD4x108
Centre bore63.4 mm
Offset (ET)ET47.5
Fixing typeEcrous - 12x1.50
Tightening torque135 Nm
Original tyres205/50R16
Hub centric rings 63.4 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Focus ST170

A Ford Focus ST170 (2002–2004) uses a 4x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x108 required. See all vehicles with 4x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET47.5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/50R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Focus ST170 without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Fiesta MK8 2017–2023 Ford EcoSport 2014–2023 Ford B Max 2012–2018 Ford Fiesta MK7 2008–2017 Ford Streetka 2003–2006 Ford Focus RS 2002–2003 Ford Fusion EU 2002–2012 Ford Cougar 1999–2004 Ford Focus I 1998–2004 Ford Puma (1997) 1997–2001 Ford Ka 1996–2008 Ford Courier 1995–2000 Ford Mondeo ST200 1995–2000 Ford Mondeo 1993–2000 Ford Escort RS Cosworth 1992–1996 Ford Escort Express 1990–1999

Will wheels from another vehicle fit your Focus ST170?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford Focus ST170?

A Ford Focus ST170 (2002–2004) has a PCD of 4x108: 4 studs or bolts spaced around a circle 108 mm in diameter.

Does a Ford Focus ST170 need a hub centric ring?

The centre bore (hub diameter) of a Ford Focus ST170 is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Focus ST170?

The recorded original offset is ET47.5. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Focus ST170?

The specified tightening torque is 135 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Focus ST170?

With the same PCD (4x108) and the same centre bore (63.4 mm), these include: Ford Fiesta MK8, Ford EcoSport, Ford B Max, Ford Fiesta MK7. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.