FRENES

Honda CR-V RD PCD

2001–2006
VERIFIED
⌀64.1
PCD5x114.3
Centre bore64.1 mm
Offset (ET)ET50
Fixing typeM12x1.5
Original tyres205/65R16, 215/65R16
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda CR-V RD

A Honda CR-V RD (2001–2006) uses a 5x114.3 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
  • Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/65R16, 215/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 64.1 mm 6Jx16 ET50 205/65R16
Version 2 5x114.3 64.1 mm 6.5Jx16 ET50 215/65R16

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda CR-V RD without rings. Offset, width, diameter and caliper clearance still need checking.

Honda e:Ny1 from 2023 Honda Civic FL from 2022 Honda e:Np1 from 2022 Honda e:Ns1 from 2022 Honda ZR-V from 2022 Honda HR-V RV from 2021 Honda e from 2020 Honda CR-V RW 2018–2023 Honda Civic FK7 2017–2022 Honda HR-V RU 2015–2021 Honda XR-V from 2014 Honda Civic FK 2012–2017 Honda CR-V RM 2012–2018 Honda CR-Z 2010–2017 Honda Accord CU 2008–2015 Honda Civic Type R FN2 2007–2011

Will wheels from another vehicle fit your CR-V RD?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Honda CR-V RD?

A Honda CR-V RD (2001–2006) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Honda CR-V RD need a hub centric ring?

The centre bore (hub diameter) of a Honda CR-V RD is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda CR-V RD?

The recorded original offset is ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Honda CR-V RD?

With the same PCD (5x114.3) and the same centre bore (64.1 mm), these include: Honda e:Ny1, Honda Civic FL, Honda e:Np1, Honda e:Ns1. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.