FRENES

Kia Sportage III PCD

2010–2016
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET31.5 to ET40.5
Fixing typeM12x1.5
Original tyres215/70R16, 225/60R17, 235/55R18
SL
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Kia Sportage III

A Kia Sportage III (2010–2016) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET31.5 to ET40.5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/70R16, 225/60R17, 235/55R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Kia Sportage

Previous generation: Kia Sportage II (2004–2010) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Kia Sportage IV (2016–2021) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Sportage I 1994–2004 · 5x114.3 Sportage II 2004–2010 · 5x114.3 Sportage III 2010–2016 Sportage IV 2016–2021 · 5x114.3 Sportage V from 2021 · 5x114.3

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 6.5Jx16 ET31.5 215/70R16
Version 2 5x114.3 67.1 mm 6.5Jx17 ET35 225/60R17
Version 3 5x114.3 67.1 mm 7Jx18 ET40.5 235/55R18

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Kia Sportage III without rings. Offset, width, diameter and caliper clearance still need checking.

Kia EV3 from 2024 Kia EV9 from 2023 Kia Niro II from 2022 Kia EV6 from 2021 Kia Sportage V from 2021 Kia Sorento IV from 2020 Kia e-Soul 2019–2024 Kia Niro EV from 2019 Kia ProCeed from 2019 Kia XCeed from 2019 Kia Ceed III from 2018 Kia Stinger 2017–2024 Kia Niro 2016–2022 Kia Sportage IV 2016–2021 Kia Ceed GT from 2013 Kia Rondo 2013–2018

Will wheels from another vehicle fit your Sportage III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Kia Sportage III?

A Kia Sportage III (2010–2016) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Kia Sportage III need a hub centric ring?

The centre bore (hub diameter) of a Kia Sportage III is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Kia Sportage III?

The recorded original offset is ET31.5 to ET40.5 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Kia Sportage III?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Kia EV3, Kia EV9, Kia Niro II, Kia EV6. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.