FRENES

Kia Sportage I PCD

1994–2004
VERIFIED
⌀67.1
PCD5x114.3 or 5x139.7
Centre bore95.3 or 67.1 mm
Offset (ET)ET40.5 to ET51
Fixing type-
Tightening torque98 Nm
Original tyres215/70R16, 215/65R17
⚠ This model comes with 5x114.3 or 5x139.7 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Kia Sportage I

A Kia Sportage I (1994–2004) uses a 5x114.3 or 5x139.7 PCD and a centre bore of 95.3 or 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 or 5x139.7 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET40.5 to ET51. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread -, tightened to 98 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/70R16, 215/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x139.7 95.3 mm — ET45 —
Version 2 5x114.3 67.1 mm — ET45 —
Version 3 5x114.3 67.1 mm — ET40.5 215/70R16
Version 4 5x114.3 67.1 mm — ET50 215/70R16
Version 5 5x114.3 67.1 mm — ET51 215/65R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Kia Sportage I without rings. Offset, width, diameter and caliper clearance still need checking.

Kia EV3 from 2024 Kia EV9 from 2023 Kia EV6 from 2021 Kia Sportage V from 2021 Kia e-Soul 2019–2024 Kia Niro EV from 2019 Kia ProCeed from 2019 Kia XCeed from 2019 Kia Ceed III from 2018 Kia Stinger 2017–2024 Kia Niro 2016–2022 Kia Sportage IV 2016–2021 Kia Ceed GT from 2013 Kia Rondo 2013–2018 Kia Venga 2010–2019 Kia Soul 2009–2020

Will wheels from another vehicle fit your Sportage I?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Kia Sportage I?

A Kia Sportage I (1994–2004) can have a 5x114.3 or 5x139.7 PCD depending on the version: check on an original wheel.

Does a Kia Sportage I need a hub centric ring?

The centre bore (hub diameter) of a Kia Sportage I is 95.3 or 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Kia Sportage I?

The recorded original offset is ET40.5 to ET51 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Kia Sportage I?

The specified tightening torque is 98 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Kia Sportage I?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Kia EV3, Kia EV9, Kia EV6, Kia Sportage V. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.