Lancia Kappa PCD

1994–2000

VERIFIED

Centre bore58.1 mm

Offset (ET)ET30

Fixing type-

Hub centric rings 58.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lancia Kappa

A Lancia Kappa (1994–2000) uses a 5x108 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x108 required. See all vehicles with 5x108.
Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
Offset: the original is ET30. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Lancia Kappa without rings. Offset, width, diameter and caliper clearance still need checking.

Lancia Thesis 2002–2009 Alfa Romeo 166 1998–2007

Will wheels from another vehicle fit your Kappa?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Zeekr 9X ⌀63.4 Lynk&Co 02 ⌀63.4 Polestar Polestar 4 ⌀63.4 Volvo EC40 ⌀63.4 Volvo EX40 axe arrière ⌀63.4 Volvo EX40 axe avant ⌀63.4 Zeekr 7X ⌀63.4 DS DS 7 ⌀65.1

Frequently asked questions

What is the PCD of a Lancia Kappa?

A Lancia Kappa (1994–2000) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Lancia Kappa need a hub centric ring?

The centre bore (hub diameter) of a Lancia Kappa is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lancia Kappa?

The recorded original offset is ET30. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Lancia Kappa?

With the same PCD (5x108) and the same centre bore (58.1 mm), these include: Lancia Thesis, Alfa Romeo 166. Offset, width and rim diameter still need checking for each vehicle.

Other Lancia models

Flavia 5x114.3 Voyager 5x127 Musa 4x98 Ypsilon 4x98 Phedra 5x98 Thesis 5x108 Lybra 4x98 Y 4x98 Delta Integrale 5 trou 5x98 Zeta 5x98 Delta 4x98 Delta Integrale 4 trou 4x98 All Lancia →

Does a value look wrong, or is a version missing? Let us know, we check every report.