Lincoln Mark LT PCD

2005–2008
VERIFIED
⌀87.1
Centre bore87.1 mm
Offset (ET)ET44
Fixing typeEcrous - 14x2.00

Fitting wheels on a Lincoln Mark LT

A Lincoln Mark LT (2005–2008) uses a 6x135 PCD and a centre bore of 87.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x135 required. See all vehicles with 6x135.
  • Centre bore: the wheel must have a centre bore of 87.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 87.1 mm.
  • Offset: the original is ET44. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 14x2.00. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Will wheels from another vehicle fit your Mark LT?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Lincoln Mark LT?

A Lincoln Mark LT (2005–2008) has a PCD of 6x135: 6 studs or bolts spaced around a circle 135 mm in diameter.

Does a Lincoln Mark LT need a hub centric ring?

The centre bore (hub diameter) of a Lincoln Mark LT is 87.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lincoln Mark LT?

The recorded original offset is ET44. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Lincoln Mark LT?

With the same PCD (6x135) and the same centre bore (87.1 mm), these include: Lincoln Navigator, Ford Expedition, Ford F150. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.