Lincoln Mark VII PCD

1988–1992

VERIFIED

Centre bore70.3 mm

Offset (ET)ET25

Fixing type-

Original tyres225/60R16

Hub centric rings 70.3 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lincoln Mark VII

A Lincoln Mark VII (1988–1992) uses a 5x114.3 PCD and a centre bore of 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Offset: the original is ET25. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Lincoln Mark VII without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Flex 2009–2019 Ford Mustang Shelby GT500 2006–2014

Will wheels from another vehicle fit your Mark VII?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Lincoln Mark VII?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Ford Explorer 1991–2002

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.

Lincoln MKX ⌀70.6 Lincoln Aviator ⌀70.6 Lincoln Towncar ⌀70.6 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1

Frequently asked questions

What is the PCD of a Lincoln Mark VII?

A Lincoln Mark VII (1988–1992) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Lincoln Mark VII need a hub centric ring?

The centre bore (hub diameter) of a Lincoln Mark VII is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lincoln Mark VII?

The recorded original offset is ET25. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Lincoln Mark VII?

With the same PCD (5x114.3) and the same centre bore (70.3 mm), these include: Ford Flex, Ford Mustang Shelby GT500. Offset, width and rim diameter still need checking for each vehicle.

Other Lincoln models

Corsair 5x108 Nautilus 5x108 MKX 5x114.3 Mark LT 6x135 Aviator 5x114.3 LS 5x108 Navigator 5x135 Mark VIII 5x108 Towncar 5x114.3 Continental 5x108 All Lincoln →

Does a value look wrong, or is a version missing? Let us know, we check every report.