FRENES

Mazda CX-5 PCD

2012–2017
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET45 to ET50
Fixing typeEcrous - 12x1.50
Tightening torque130 Nm
Original tyres225/65R17
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda CX-5

A Mazda CX-5 (2012–2017) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET45 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 7Jx17 ET50 225/65R17
Version 2 5x114.3 67.1 mm 7Jx17 ET45 225/65R17
Version 3 5x114.3 67.1 mm — ET45 —

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda CX-5 without rings. Offset, width, diameter and caliper clearance still need checking.

Mazda CX-80 from 2024 Mazda Mazda6e from 2024 Mazda CX-60 from 2022 Mazda MX-30 from 2020 Mazda CX-30 from 2019 Mazda CX-3 2015–2024 Mazda Mazda3 2013–2019 Mazda Mazda3 MPS 2009–2013 Mazda CX-7 2007–2012 Mazda CX-9 from 2007 Mazda 3 MPS 2006–2009 Mazda 6 MPS 2006–2008 Mazda 5 2005–2010 Mazda 3 2003–2009 Mazda RX-8 2003–2012 Mazda 6 2002–2008

Will wheels from another vehicle fit your CX-5?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mazda CX-5?

A Mazda CX-5 (2012–2017) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mazda CX-5 need a hub centric ring?

The centre bore (hub diameter) of a Mazda CX-5 is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda CX-5?

The recorded original offset is ET45 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mazda CX-5?

The specified tightening torque is 130 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mazda CX-5?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Mazda CX-80, Mazda Mazda6e, Mazda CX-60, Mazda MX-30. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.