FRENES

Mini Cooper Clubman S PCD

from 2007
VERIFIED
⌀56.1
PCD4x100
Centre bore56.1 mm
Offset (ET)ET50
Fixing typeM14x1.25
Tightening torque140 Nm
Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mini Cooper Clubman S

A Mini Cooper Clubman S (from 2007) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mini Cooper Clubman S without rings. Offset, width, diameter and caliper clearance still need checking.

Mini Coupe 2011–2015 Mini Cooper Clubman from 2007 Mini Cooper S 2001–2006 Mini One 2001–2006 Mini Cooper 1959–2000 Nissan Dayz from 2023 Honda WR-V from 2017 MG MG3 from 2017 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Peugeot iON from 2009 Honda Fit from 2008 Proton Persona 2007–2010 Rover CityRover 2004–2006 Rover Streetwise 2004–2006

Will wheels from another vehicle fit your Cooper Clubman S?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mini Cooper Clubman S?

A Mini Cooper Clubman S (from 2007) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Mini Cooper Clubman S need a hub centric ring?

The centre bore (hub diameter) of a Mini Cooper Clubman S is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mini Cooper Clubman S?

The recorded original offset is ET50. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mini Cooper Clubman S?

The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mini Cooper Clubman S?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Mini Coupe, Mini Cooper Clubman, Mini Cooper S, Mini One. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.