Mitsubishi Lancer EVO IX PCD

2006–2008

VERIFIED

Centre bore67.1 mm

Offset (ET)ET38

Fixing typeEcrous - 12x1.50

Tightening torque98 Nm

Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mitsubishi Lancer EVO IX

A Mitsubishi Lancer EVO IX (2006–2008) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 98 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mitsubishi Lancer EVO IX without rings. Offset, width, diameter and caliper clearance still need checking.

Mitsubishi Eclipse Cross from 2017 Mitsubishi ASX 2010–2023 Mitsubishi Lancer EVO X from 2008 Mitsubishi Grandis 2004–2011 Mitsubishi Lancer 2.0i 2003–2008 Mitsubishi Lancer EVO VIII 2003–2005 Mitsubishi Outlander 2003–2007 Mitsubishi Airtrek 2001–2005 Mitsubishi Lancer EVO VII 2001–2002 Mitsubishi Pajero Pinin 2000–2007 Mitsubishi Lancer EVO VI 1999–2001 Mitsubishi Lancer EVO V 1998–1998 Mitsubishi Space Gear 1995–2006 Mitsubishi FTO 1994–2002 Mitsubishi L300 1994–2007 Mitsubishi L400 2WD 1994–2007

Will wheels from another vehicle fit your Lancer EVO IX?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67.1 mm, and will not fit if it is smaller.

Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Leapmotor C10 ⌀73.1 Renault 5 E-Tech ⌀66.1 Renault Grand Kangoo ⌀66.1 Renault Rafale ⌀66.1 Renault Symbioz ⌀66.1

Frequently asked questions

What is the PCD of a Mitsubishi Lancer EVO IX?

A Mitsubishi Lancer EVO IX (2006–2008) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mitsubishi Lancer EVO IX need a hub centric ring?

The centre bore (hub diameter) of a Mitsubishi Lancer EVO IX is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mitsubishi Lancer EVO IX?

The recorded original offset is ET38. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mitsubishi Lancer EVO IX?

The specified tightening torque is 98 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mitsubishi Lancer EVO IX?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Mitsubishi Eclipse Cross, Mitsubishi ASX, Mitsubishi Lancer EVO X, Mitsubishi Grandis. Offset, width and rim diameter still need checking for each vehicle.

Other Mitsubishi models

Eclipse Cross 5x114.3 ASX 5x114.3 i-MiEV 4x100 Lancer EVO X 5x114.3 Grandis 5x114.3 Lancer 1.3i, 1.6i 4x114.3 Outlander 5x114.3 Lancer 2.0i 5x114.3 Lancer EVO VIII 5x114.3 Airtrek 5x114.3 Lancer EVO VII 5x114.3 Carisma 1.6, 1.8GDi,1.9TD 4x114.3 All Mitsubishi →

Does a value look wrong, or is a version missing? Let us know, we check every report.