A Mitsubishi L200 (2019) (2019–2024) uses a 6x139.7 PCD and a centre bore of 67.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/70R16, 265/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Generations of the Mitsubishi L200
Previous generation: Mitsubishi L200 4WD (1996–2006) — same 6x139.7 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
2.2 Di-D 150
6x139.7
67.1 mm
7Jx16
ET38
245/70R16
2.2 Di-D 150 Instyle / 2.4 Di-D 181
6x139.7
67.1 mm
7.5Jx18
ET38
265/60R18
Vehicles with the same PCD and centre bore
Same 6x139.7 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mitsubishi L200 (2019) without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67.1 mm, and will not fit if it is smaller.
A Mitsubishi L200 (2019) (2019–2024) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.
Does a Mitsubishi L200 (2019) need a hub centric ring?
The centre bore (hub diameter) of a Mitsubishi L200 (2019) is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Mitsubishi L200 (2019)?
The recorded original offset is ET38 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
Which vehicles have the same PCD as a Mitsubishi L200 (2019)?
With the same PCD (6x139.7) and the same centre bore (67.1 mm), these include: Mitsubishi Pajero Shogun, Mitsubishi Pajero Wagon. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more