FRENES

Mitsubishi Lancer 1.3i, 1.6i PCD

2003–2008
VERIFIED
⌀67.1
PCD4x114.3
Centre bore67.1 mm
Offset (ET)ET46
Fixing typeEcrous - 12x1.50
Tightening torque98 Nm
Original tyres185/65R14
Hub centric rings 67.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mitsubishi Lancer 1.3i, 1.6i

A Mitsubishi Lancer 1.3i, 1.6i (2003–2008) uses a 4x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x114.3 required. See all vehicles with 4x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 98 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/65R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mitsubishi Lancer 1.3i, 1.6i without rings. Offset, width, diameter and caliper clearance still need checking.

Mitsubishi Carisma 1.6, 1.8GDi,1.9TD 2000–2004 Mitsubishi Space Star 1998–2005 Mitsubishi Carisma 1.8i 1995–2001 Mitsubishi Lancer EVO III 1995–1996 Mitsubishi Lancer EVO II 1994–1995 Mitsubishi Lancer EVO I 1992–1994 Mitsubishi Space Runner 1991–1999 Mitsubishi Space Wagon 1991–1999 Mitsubishi Galant 1989–1992 Mitsubishi Colt 1988–1992 Mitsubishi Lancer 1988–1992 Mitsubishi Sapporo 1985–1990 Mitsubishi Cordia 1982–1990 Mitsubishi Starion 1982–1991 Smart Forfour 2004–2007 Kia Cerato 2003–2008

Will wheels from another vehicle fit your Lancer 1.3i, 1.6i?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mitsubishi Lancer 1.3i, 1.6i?

A Mitsubishi Lancer 1.3i, 1.6i (2003–2008) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mitsubishi Lancer 1.3i, 1.6i need a hub centric ring?

The centre bore (hub diameter) of a Mitsubishi Lancer 1.3i, 1.6i is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mitsubishi Lancer 1.3i, 1.6i?

The recorded original offset is ET46. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mitsubishi Lancer 1.3i, 1.6i?

The specified tightening torque is 98 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mitsubishi Lancer 1.3i, 1.6i?

With the same PCD (4x114.3) and the same centre bore (67.1 mm), these include: Mitsubishi Carisma 1.6, 1.8GDi,1.9TD, Mitsubishi Space Star, Mitsubishi Carisma 1.8i, Mitsubishi Lancer EVO III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.