A Nissan 370Z axe arrière (2009–2021) uses a 5x114.3 PCD and a centre bore of 66.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
Offset: the original is ET15. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/45R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan 370Z axe arrière without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.1 mm, and will not fit if it is smaller.
A Nissan 370Z axe arrière (2009–2021) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.
Does a Nissan 370Z axe arrière need a hub centric ring?
The centre bore (hub diameter) of a Nissan 370Z axe arrière is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Nissan 370Z axe arrière?
The recorded original offset is ET15. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Nissan 370Z axe arrière?
The specified tightening torque is 108 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Nissan 370Z axe arrière?
With the same PCD (5x114.3) and the same centre bore (66.1 mm), these include: Nissan Qashqai J12, Nissan Townstar, Nissan Ariya, Nissan Juke II. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more