FRENES

Nissan Micra K13 PCD

2010–2017
VERIFIED
⌀60.1
PCD4x100
Centre bore60.1 mm
Offset (ET)ET45 to ET55
Fixing typeM12x1.25
Original tyres165/70R14, 175/60R15, 185/55R16
Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Micra K13

A Nissan Micra K13 (2010–2017) uses a 4x100 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET45 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 165/70R14, 175/60R15, 185/55R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Nissan Micra

Previous generation: Nissan Micra K12 (2003–2010) — same 4x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Nissan Micra K14 (from 2017) — same 4x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Micra K10 1982–1992 · 4x100 Micra K12 2003–2010 · 4x100 Micra K13 2010–2017 Micra K14 from 2017 · 4x100

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 60.1 mm 5.5Jx14 ET45 165/70R14
Version 2 4x100 60.1 mm 5.5Jx15 ET50 175/60R15
Version 3 4x100 60.1 mm 6Jx16 ET55 185/55R16

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Micra K13 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Micra K14 from 2017 Nissan Almera from 2015 Nissan Note E12 2013–2017 Nissan Note 2006–2013 Nissan Kubistar 2003–2009 Nissan Micra K12 2003–2010 Nissan Cube 2002–2008 Nissan Platina 2002–2010 Renault Twingo E-Tech from 2026 Dacia Jogger from 2022 Dacia Spring from 2021 Dacia Logan III from 2020 Dacia Sandero III from 2020 Renault Clio 5 from 2019 Renault Twingo 3 2014–2024 Smart Forfour Back 2014–2021

Will wheels from another vehicle fit your Micra K13?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Nissan Micra K13?

A Nissan Micra K13 (2010–2017) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Nissan Micra K13 need a hub centric ring?

The centre bore (hub diameter) of a Nissan Micra K13 is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Micra K13?

The recorded original offset is ET45 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Nissan Micra K13?

With the same PCD (4x100) and the same centre bore (60.1 mm), these include: Nissan Micra K14, Nissan Almera, Nissan Note E12, Nissan Note. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.