A Nissan Sunny (1986–1991) uses a 4x100 PCD and a centre bore of 59.1 or 60.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 59.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 59.1 mm.
Offset: the original is ET40 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/70R13, 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
All recorded versions (3)
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
4x100
59.1 mm
—
ET40
175/70R13
Version 2
4x100
59.1 mm
—
ET45
—
Version 3
4x100
60.1 mm
—
ET40
195/65R15
Vehicles with the same PCD and centre bore
Same 4x100 PCD and same 59.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Sunny without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 59.1 mm, and will not fit if it is smaller.
A Nissan Sunny (1986–1991) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.
Does a Nissan Sunny need a hub centric ring?
The centre bore (hub diameter) of a Nissan Sunny is 59.1 or 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Nissan Sunny?
The recorded original offset is ET40 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Nissan Sunny?
The specified tightening torque is 110 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Nissan Sunny?
With the same PCD (4x100) and the same centre bore (59.1 mm), these include: Nissan Almera N15, Nissan Figaro, Nissan 100NX, Nissan Micra K10. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more