Nissan Micra K10 PCD

1982–1992

VERIFIED

Centre bore59.1 or 60.1 or 66.1 mm

Offset (ET)ET38 to ET50

Fixing typeEcrous - 12x1.25

Tightening torque108 Nm

Original tyres155/70R13, 185/65R15, 195/55R18

⚠ This model comes with 4x100 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 59.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Micra K10

A Nissan Micra K10 (1982–1992) uses a 4x100 or 5x114.3 PCD and a centre bore of 59.1 or 60.1 or 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 or 5x114.3 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 59.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 59.1 mm.
Offset: the original is ET38 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 155/70R13, 185/65R15, 195/55R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x100	59.1 mm	—	ET45	155/70R13
Version 2	4x100	60.1 mm	—	ET45	—
Version 3	4x100	60.1 mm	—	ET50	185/65R15
Version 4	5x114.3	66.1 mm	—	ET38	195/55R18

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 59.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Micra K10 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Almera N15 1995–2000 Nissan Figaro 1991–1992 Nissan 100NX 1990–1996 Nissan Sunny 1986–1991 Subaru Vivio 1992–2001 Subaru Justy 1984–1994

Will wheels from another vehicle fit your Micra K10?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Nissan Micra K10?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Nissan Townstar from 2022 Wheels from Nissan Murano 2015–2024 Wheels from Nissan e-NV200 from 2014 Wheels from Nissan Leaf 2010–2017

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 59.1 mm, and will not fit if it is smaller.

Nissan Dayz ⌀56.1 Nissan Micra K14 ⌀60.1 Nissan Almera ⌀60.1 Nissan Pixo ⌀54.1 Nissan Note ⌀60.1 Nissan Kubistar ⌀60.1 Nissan Micra K12 ⌀60.1 Nissan Cube ⌀60.1

Frequently asked questions

What is the PCD of a Nissan Micra K10?

A Nissan Micra K10 (1982–1992) can have a 4x100 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Nissan Micra K10 need a hub centric ring?

The centre bore (hub diameter) of a Nissan Micra K10 is 59.1 or 60.1 or 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Micra K10?

The recorded original offset is ET38 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Micra K10?

The specified tightening torque is 108 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Micra K10?

With the same PCD (4x100) and the same centre bore (59.1 mm), these include: Nissan Almera N15, Nissan Figaro, Nissan 100NX, Nissan Sunny. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Qashqai J12 5x114.3 Townstar 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 e-NV200 5x114.3 Pulsar 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.