Opel Frontera PCD

1990–2004

VERIFIED

Centre bore108.2 or 65.1 mm

Offset (ET)ET20 to ET38

Fixing typeEcrous - 12x1.50

Tightening torque110 Nm

Original tyres205/65R16

⚠ This model comes with 6x139.7 or 4x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 108.2 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Frontera

A Opel Frontera (1990–2004) uses a 6x139.7 or 4x108 PCD and a centre bore of 108.2 or 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 or 4x108 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 108.2 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 108.2 mm.
Offset: the original is ET20 to ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	6x139.7	108.2 mm	—	ET38	—
Version 2	4x108	65.1 mm	—	ET20	205/65R16

Will wheels from another vehicle fit your Frontera?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Opel Frontera?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Opel Corsa E 2014–2019 Wheels from Opel Mokka 2012–2016 Wheels from Fiat 600 from 2023 Wheels from Fiat 600E from 2023

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 108.2 mm, and will not fit if it is smaller.

Opel Monterey ⌀100.1 Opel Campo 2WD ⌀110 Opel Campo 4WD ⌀110 Infiniti QX80 ⌀77.8 Hyundai Staria ⌀92.5 RAM RAM 1500 ⌀77.8 GMC Sierra 1500 ⌀78.1 Holden Colorado ⌀99.5

Frequently asked questions

What is the PCD of a Opel Frontera?

A Opel Frontera (1990–2004) can have a 6x139.7 or 4x108 PCD depending on the version: check on an original wheel.

Does a Opel Frontera need a hub centric ring?

The centre bore (hub diameter) of a Opel Frontera is 108.2 or 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Frontera?

The recorded original offset is ET20 to ET38 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Frontera?

The specified tightening torque is 110 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Opel models

Rocks-E 4x108 Zafira Life 5x108 Corsa F 4x108 Ampera-e 5x105 Crossland X 4x108 Grandland X 5x108 Adam S 5x110 Karl 4x100 Astra K 5x105 Adam Rocks 4x100 Corsa E 4x100 Insignia Country Tourer 5x120 All Opel →

Does a value look wrong, or is a version missing? Let us know, we check every report.