Toyota Land Cruiser 250 PCD

Fitting wheels on a Toyota Land Cruiser 250

A Toyota Land Cruiser 250 (from 2024) uses a 6x139.7 PCD and a centre bore of 95.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

• PCD: 6x139.7 required. See all vehicles with 6x139.7.
• Centre bore: the wheel must have a centre bore of 95.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 95.1 mm.
• Offset: the original is ET60. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
• Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
• Tyres: original fitment is 265/65R18, 265/70R18, 265/60R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Toyota Land Cruiser

Previous generation: Toyota Land Cruiser J20 V8 (from 2008) — the bolt pattern changes (6x139.7 instead of 5x150): the wheels are not interchangeable.

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 95.1 mm, and will not fit if it is smaller.

Frequently asked questions

Other Toyota models