Peugeot 407 PCD

2004–2010

VERIFIED

Centre bore65.1 mm

Offset (ET)ET44

Fixing typeM12x1.25

Tightening torque90 Nm

Original tyres205/60R16

Hub centric rings 65.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Peugeot 407

A Peugeot 407 (2004–2010) uses a 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x108 required. See all vehicles with 5x108.
Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
Offset: the original is ET44. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.25, tightened to 90 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Peugeot 407 without rings. Offset, width, diameter and caliper clearance still need checking.

Peugeot 408 from 2022 Peugeot Rifter from 2018 Peugeot 5008 II 2017–2024 Peugeot 3008 II 2016–2023 Peugeot Traveller from 2016 Peugeot 308 SW 2014–2022 Peugeot RCZ-R 2014–2016 Peugeot 308 II 2013–2021 Peugeot 508 from 2011 Peugeot RCZ 2010–2016 Peugeot 3008 I 2009–2016 Peugeot 5008 I 2009–2017 Peugeot 308 I 2007–2013 Peugeot Expert 2 2006–2016 Peugeot 407 Coupe 2005–2009 Peugeot 607 2000–2010

Will wheels from another vehicle fit your 407?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Peugeot 407?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Peugeot Traveller from 2016 Wheels from Peugeot 308 II 2013–2021 Wheels from Peugeot 508 from 2011 Wheels from Peugeot 3008 I 2009–2016

Same PCD, different centre bore

These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Zeekr 9X ⌀63.4 Lynk&Co 02 ⌀63.4 Polestar Polestar 4 ⌀63.4 Volvo EC40 ⌀63.4 Volvo EX40 axe arrière ⌀63.4 Volvo EX40 axe avant ⌀63.4 Zeekr 7X ⌀63.4 Ford Tourneo Courier ⌀63.4

Frequently asked questions

What is the PCD of a Peugeot 407?

A Peugeot 407 (2004–2010) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Peugeot 407 need a hub centric ring?

The centre bore (hub diameter) of a Peugeot 407 is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Peugeot 407?

The recorded original offset is ET44. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Peugeot 407?

The specified tightening torque is 90 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Peugeot 407?

With the same PCD (5x108) and the same centre bore (65.1 mm), these include: Peugeot 408, Peugeot Rifter, Peugeot 5008 II, Peugeot 3008 II. Offset, width and rim diameter still need checking for each vehicle.

Other Peugeot models

e-208 4x108 408 5x108 208 II 4x108 2008 II 4x108 Rifter 5x108 5008 II 5x108 Traveller 5x108 3008 II 5x108 RCZ-R 5x108 308 SW 5x108 108 4x100 308 II 5x108 All Peugeot →

Does a value look wrong, or is a version missing? Let us know, we check every report.