Porsche 911 991 Turbo S PCD

from 2013

VERIFIED

Centre bore71.5 mm

Offset (ET)ET51

Fixing typeM14x1.50

Tightening torque130 Nm

Original tyres245/35R20

Hub centric rings 71.5 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Porsche 911 991 Turbo S

A Porsche 911 991 Turbo S (from 2013) uses a 5x130 PCD and a centre bore of 71.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 71.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.5 mm.
Offset: the original is ET51. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/35R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 71.5 mm centre bore: wheels from these vehicles bolt on and centre on a Porsche 911 991 Turbo S without rings. Offset, width, diameter and caliper clearance still need checking.

Porsche Boxster 718 from 2016 Porsche Cayman 718 from 2016 Porsche Boxster 1996–2012 Bentley Bentayga from 2015 Bentley Mulsanne 2010–2017 Audi Q7 V12TDI 2008–2012 Volkswagen Touareg 2002–2010

Will wheels from another vehicle fit your 911 991 Turbo S?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Porsche 911 991 Turbo S?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Bentley Bentayga from 2015 Wheels from Bentley Mulsanne 2010–2017 Wheels from Audi Q7 V12TDI 2008–2012

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.5 mm, and will not fit if it is smaller.

Porsche Taycan ⌀71.6 Porsche Panamera ⌀71.6 Porsche 911 997 GT2 ⌀71.6 Porsche 911 997 GT3 ⌀71.6 Porsche 911 997 GT3 RS ⌀71.6 Porsche 911 997 Turbo ⌀71.6 Porsche 911 997 Carrera ⌀71.6 Porsche 911 997 Carrera 4 ⌀71.6

Frequently asked questions

What is the PCD of a Porsche 911 991 Turbo S?

A Porsche 911 991 Turbo S (from 2013) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Porsche 911 991 Turbo S need a hub centric ring?

The centre bore (hub diameter) of a Porsche 911 991 Turbo S is 71.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Porsche 911 991 Turbo S?

The recorded original offset is ET51. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Porsche 911 991 Turbo S?

The specified tightening torque is 130 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Porsche 911 991 Turbo S?

With the same PCD (5x130) and the same centre bore (71.5 mm), these include: Porsche Boxster 718, Porsche Cayman 718, Porsche Boxster, Bentley Bentayga. Offset, width and rim diameter still need checking for each vehicle.

Other Porsche models

Taycan 5x130 Boxster 718 5x130 Cayman 718 5x130 Macan 5x112 911 997 GTS Écrou central 911 997 GT2 RS Écrou central Panamera 5x130 911 997 GT2 5x130 911 997 Turbo 5x130 911 997 GT3 5x130 911 997 GT3 RS 5x130 Cayman 5x130 All Porsche →

Does a value look wrong, or is a version missing? Let us know, we check every report.