FRENES

Porsche Cayenne 958 PCD

2010–2018
VERIFIED
⌀71.6
PCD5x130
Centre bore71.6 mm
Offset (ET)ET53
Fixing typeM14x1.5
Tightening torque160 Nm
Original tyres255/55R18
Type 92A, restylage 2014 inclus. GTS et Turbo : 265/50R19 8.5Jx19 ET59.
Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Porsche Cayenne 958

A Porsche Cayenne 958 (2010–2018) uses a 5x130 PCD and a centre bore of 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x130 required. See all vehicles with 5x130.
  • Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
  • Offset: the original is ET53. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 255/55R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Porsche Cayenne

Previous generation: Porsche Cayenne (2002–2010) — same 5x130 bolt pattern, but the centre bore goes from 71.5 to 71.6 mm: hub ring one way, no fit the other way. Next generation: Porsche Cayenne 9YA (from 2018) — same 5x130 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Cayenne 2002–2010 · 5x130 Cayenne 958 2010–2018 Cayenne 9YA from 2018 · 5x130

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Porsche Cayenne 958 without rings. Offset, width, diameter and caliper clearance still need checking.

Porsche Panamera 976 from 2024 Porsche 911 992 Turbo from 2020 Porsche Taycan from 2020 Porsche 911 992 Carrera from 2019 Porsche Cayenne 9YA from 2018 Porsche 911 991.2 Carrera 2016–2019 Porsche Panamera 971 2016–2023 Porsche 918 Spyder 2013–2015 Porsche Cayman 981 2013–2016 Porsche Boxster 981 2012–2016 Porsche 911 991 Carrera 2011–2015 Porsche Panamera 2009–2016 Porsche 911 997 GT2 from 2007 Porsche 911 997 GT3 2006–2009 Porsche 911 997 GT3 RS 2006–2009 Porsche 911 997 Turbo 2006–2010

Will wheels from another vehicle fit your Cayenne 958?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Porsche Cayenne 958?

A Porsche Cayenne 958 (2010–2018) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Porsche Cayenne 958 need a hub centric ring?

The centre bore (hub diameter) of a Porsche Cayenne 958 is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Porsche Cayenne 958?

The recorded original offset is ET53. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Porsche Cayenne 958?

The specified tightening torque is 160 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Porsche Cayenne 958?

With the same PCD (5x130) and the same centre bore (71.6 mm), these include: Porsche Panamera 976, Porsche 911 992 Turbo, Porsche Taycan, Porsche 911 992 Carrera. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.