Volvo 940 PCD

1990–1998

VERIFIED

Centre bore65.1 mm

Offset (ET)ET25

Fixing typeEcrous - 12x1.50

Tightening torque85 Nm

Hub centric rings 65.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo 940

A Volvo 940 (1990–1998) uses a 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x108 required. See all vehicles with 5x108.
Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
Offset: the original is ET25. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 85 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo 940 without rings. Offset, width, diameter and caliper clearance still need checking.

Volvo S60R 2003–2010 Volvo V70R 2003–2007 Volvo S60 2000–2010 Volvo XC70 2000–2007 Volvo C70 1998–2006 Volvo S80 1998–2006 Volvo S70 1997–2000 Volvo V70 1997–2000 Volvo V90 1996–1998 Volvo S90 1994–1998 Volvo 850 1991–1993 Volvo 960 1990–1994 Volvo 740 1984–1992 Volvo 745 1984–1992 Volvo 240 Serie 1974–1993 Volvo 260 Serie 1974–1982

Will wheels from another vehicle fit your 940?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Volvo EC40 ⌀63.4 Volvo EX40 axe arrière ⌀63.4 Volvo EX40 axe avant ⌀63.4 Volvo EX30 ⌀63.4 Volvo EX90 axe arrière ⌀63.4 Volvo EX90 axe avant ⌀63.4 Volvo C40 ⌀63.4 Volvo XC40 ⌀63.4

Frequently asked questions

What is the PCD of a Volvo 940?

A Volvo 940 (1990–1998) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo 940 need a hub centric ring?

The centre bore (hub diameter) of a Volvo 940 is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo 940?

The recorded original offset is ET25. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo 940?

The specified tightening torque is 85 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo 940?

With the same PCD (5x108) and the same centre bore (65.1 mm), these include: Volvo S60R, Volvo V70R, Volvo S60, Volvo XC70. Offset, width and rim diameter still need checking for each vehicle.

Other Volvo models

EC40 5x108 EX40 axe arrière 5x108 EX40 axe avant 5x108 EX30 5x108 EX90 axe avant 5x108 EX90 axe arrière 5x108 C40 5x108 XC40 5x108 V90 Cross Country 5x108 V60 Cross Country 5x108 V60 Polestar 5x108 V40 Cross Country 5x108 All Volvo →

Does a value look wrong, or is a version missing? Let us know, we check every report.