FRENES

Volvo 850 PCD

1991–1993
VERIFIED
⌀65.1
PCD4x108 or 5x108
Centre bore65.1 mm
Offset (ET)ET43
Fixing typeM12x1.75
Tightening torque110 Nm
Original tyres195/60R15
⚠ This model comes with 4x108 or 5x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 65.1 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo 850

A Volvo 850 (1991–1993) uses a 4x108 or 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x108 or 5x108 required. See all vehicles with 4x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.75, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/60R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x108 65.1 mm — ET43 195/60R15
Version 2 5x108 65.1 mm — ET43 195/60R15

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo 850 without rings. Offset, width, diameter and caliper clearance still need checking.

Alfa Romeo Junior from 2024 Fiat 600 from 2023 Fiat 600E from 2023 Fiat Topolino from 2023 Jeep Avenger from 2023 Peugeot e-208 from 2023 Opel Rocks-E from 2022 Citroen Ami from 2020 Citroen C4 III from 2020 Opel Corsa F from 2019 Peugeot 2008 II from 2019 Peugeot 208 II from 2019 DS DS 3 Crossback 2018–2021 Citroen C3 Aircross from 2017 Opel Crossland X from 2017 Citroen C3 III 2016–2024

Will wheels from another vehicle fit your 850?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volvo 850?

A Volvo 850 (1991–1993) can have a 4x108 or 5x108 PCD depending on the version: check on an original wheel.

Does a Volvo 850 need a hub centric ring?

The centre bore (hub diameter) of a Volvo 850 is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo 850?

The recorded original offset is ET43 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo 850?

The specified tightening torque is 110 Nm for M12x1.75 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo 850?

With the same PCD (4x108) and the same centre bore (65.1 mm), these include: Alfa Romeo Junior, Fiat 600, Fiat 600E, Fiat Topolino. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.