Aston Martin Lagonda PCD

1976–1989

VERIFIED

Centre bore73.9 mm

Offset (ET)ET0

Fixing type-

Hub centric rings 73.9 mm → Wheel spacers 5x120.65(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Aston Martin Lagonda

A Aston Martin Lagonda (1976–1989) uses a 5x120.65 PCD and a centre bore of 73.9 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120.65 required. See all vehicles with 5x120.65.
Centre bore: the wheel must have a centre bore of 73.9 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 73.9 mm.
Offset: the original is ET0. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120.65 PCD and same 73.9 mm centre bore: wheels from these vehicles bolt on and centre on a Aston Martin Lagonda without rings. Offset, width, diameter and caliper clearance still need checking.

Aston Martin Virage 1989–1995

Will wheels from another vehicle fit your Lagonda?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120.65 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 73.9 mm, and will not fit if it is smaller.

Aston Martin DB7 ⌀74.1 Chevrolet Corvette C7 ⌀70.3 Cadillac CTS-V ⌀67.1 Chevrolet Corvette C6 ⌀70.3 Cadillac XLR ⌀70.3 Cadillac CTS ⌀67.1 Chevrolet Jimny ⌀70.3 Chevrolet Corvette C5 ⌀70.3

Frequently asked questions

What is the PCD of a Aston Martin Lagonda?

A Aston Martin Lagonda (1976–1989) has a PCD of 5x120.65: 5 studs or bolts spaced around a circle 120.65 mm in diameter.

Does a Aston Martin Lagonda need a hub centric ring?

The centre bore (hub diameter) of a Aston Martin Lagonda is 73.9 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Aston Martin Lagonda?

The recorded original offset is ET0. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Aston Martin Lagonda?

With the same PCD (5x120.65) and the same centre bore (73.9 mm), these include: Aston Martin Virage. Offset, width and rim diameter still need checking for each vehicle.

Other Aston Martin models

Valour axe avant 5x128 Valour axe arrière 5x128 DBX axe arrière 5x128 DBX axe avant 5x128 Vantage axe avant 5x128 DBS Volante axe arrière 5x128 DBS Volante axe avant 5x128 Rapide AMR axe arrière 5x128 Rapide AMR axe avant 5x128 Vantage axe arrière 5x128 Rapide S axe arrière 5x128 Rapide S axe avant 5x128 All Aston Martin →

Does a value look wrong, or is a version missing? Let us know, we check every report.