Audi 100 PCD

1982–1990

VERIFIED

Centre bore57.1 mm

Offset (ET)ET37 to ET45

Fixing typeM14x1.50

Tightening torque120 Nm

Original tyres185/70R14, 195/65R15

⚠ This model comes with 4x108 or 5x112 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 57.1 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi 100

A Audi 100 (1982–1990) uses a 4x108 or 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x108 or 5x112 required. See all vehicles with 4x108.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET37 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/70R14, 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x108	57.1 mm	—	ET37	185/70R14
Version 2	5x112	57.1 mm	—	ET45	195/65R15

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Audi 100 without rings. Offset, width, diameter and caliper clearance still need checking.

Audi Convertible 1991–2000 Audi 80 1986–1996 Audi Coupe 1980–1988 Porsche 924 1976–1987

Will wheels from another vehicle fit your 100?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Audi 100?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Audi A4 B7 2004–2008 Wheels from Audi A3 8P 2003–2012 Wheels from Audi A4 B6 2000–2004 Wheels from Audi A4 B5 1994–2000

Same PCD, different centre bore

These vehicles also use 4x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Alfa Romeo Junior ⌀65.1 Fiat 600 ⌀65.1 Fiat 600E ⌀65.1 Fiat Topolino ⌀65.1 Jeep Avenger ⌀65.1 Peugeot e-208 ⌀65.1 Opel Rocks-E ⌀65.1 Citroen Ami ⌀65.1

Frequently asked questions

What is the PCD of a Audi 100?

A Audi 100 (1982–1990) can have a 4x108 or 5x112 PCD depending on the version: check on an original wheel.

Does a Audi 100 need a hub centric ring?

The centre bore (hub diameter) of a Audi 100 is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi 100?

The recorded original offset is ET37 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi 100?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi 100?

With the same PCD (4x108) and the same centre bore (57.1 mm), these include: Audi Convertible, Audi 80, Audi Coupe, Porsche 924. Offset, width and rim diameter still need checking for each vehicle.

Other Audi models

Q4 E-TRON 5x112 A3 8Y 5x112 RS Q8 5x112 RS6 C8 5x112 A1 Citycarver 5x100 S6 C8 5x112 RS Q3 5x112 A4 5x112 SQ2 5x112 SQ8 5x112 A6 C8 5x112 A7 5x112 All Audi →

Does a value look wrong, or is a version missing? Let us know, we check every report.