FRENES

Nissan Cube PCD

2002–2008
VERIFIED
⌀60.1
PCD4x100 or 4x114.3
Centre bore60.1 or 66.1 mm
Offset (ET)ET42 to ET45
Fixing typeEcrous - 12x1.25
Tightening torque108 Nm
Original tyres175/65R14
⚠ This model comes with 4x100 or 4x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 60.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Cube

A Nissan Cube (2002–2008) uses a 4x100 or 4x114.3 PCD and a centre bore of 60.1 or 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 4x114.3 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET42 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/65R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 60.1 mm — ET45 175/65R14
Version 2 4x114.3 66.1 mm — ET42 —

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Cube without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Micra K14 from 2017 Nissan Almera from 2015 Nissan Note 2006–2013 Nissan Kubistar 2003–2009 Nissan Micra K12 2003–2010 Nissan Platina 2002–2010 Renault Twingo E-Tech from 2026 Dacia Jogger from 2022 Dacia Spring from 2021 Dacia Sandero III from 2020 Renault Clio 5 from 2019 Renault Twingo 3 2014–2024 Smart Forfour Back 2014–2021 Smart Forfour Front 2014–2021 Renault Captur I 2013–2020 Renault Clio GrandTour 2013–2023

Will wheels from another vehicle fit your Cube?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Nissan Cube?

A Nissan Cube (2002–2008) can have a 4x100 or 4x114.3 PCD depending on the version: check on an original wheel.

Does a Nissan Cube need a hub centric ring?

The centre bore (hub diameter) of a Nissan Cube is 60.1 or 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Cube?

The recorded original offset is ET42 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Cube?

The specified tightening torque is 108 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Cube?

With the same PCD (4x100) and the same centre bore (60.1 mm), these include: Nissan Micra K14, Nissan Almera, Nissan Note, Nissan Kubistar. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.