FRENES

Citroen C1 PCD

2005–2014
VERIFIED
⌀54.1
PCD4x100
Centre bore54.1 mm
Offset (ET)ET35 to ET40
Fixing typeM12x1.25
Tightening torque100 Nm
Original tyres155/65R14, 165/65R14
Hub centric rings 54.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Citroen C1

A Citroen C1 (2005–2014) uses a 4x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET35 to ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 155/65R14, 165/65R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 54.1 mm 4.5Jx14 ET40 155/65R14
Version 2 4x100 54.1 mm 4.5Jx14 ET35 165/65R14

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Citroen C1 without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Inster from 2024 Hyundai Bayon from 2021 Toyota Aygo X 2021–2025 Hyundai i20 III from 2020 Hyundai i10 III from 2019 Kia Picanto III from 2017 Kia Stonic from 2017 Fiat 124 Spider from 2015 Mazda Mazda2 from 2015 Suzuki Alivio 2015–2021 Suzuki Celerio 2015–2021 Peugeot 108 2014–2022 Aston Martin Cygnet 2011–2013 Toyota Yaris III 2011–2020 Suzuki Swift 4WD 2010–2017 Nissan Pixo 2009–2016

Will wheels from another vehicle fit your C1?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Citroen C1?

A Citroen C1 (2005–2014) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Citroen C1 need a hub centric ring?

The centre bore (hub diameter) of a Citroen C1 is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Citroen C1?

The recorded original offset is ET35 to ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Citroen C1?

The specified tightening torque is 100 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Citroen C1?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Hyundai Inster, Hyundai Bayon, Toyota Aygo X, Hyundai i20 III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.