FRENES

Ford Fiesta MK1 PCD

1976–1983
VERIFIED
⌀63.4
PCD4x108
Centre bore63.4 mm
Offset (ET)ET41 to ET47
Fixing typeM12x1.50
Tightening torque85 Nm
Original tyres155/70R13, 175/65R14, 195/60R15
Hub centric rings 63.4 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Fiesta MK1

A Ford Fiesta MK1 (1976–1983) uses a 4x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x108 required. See all vehicles with 4x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET41 to ET47. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 85 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 155/70R13, 175/65R14, 195/60R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x108 63.4 mm — ET41 155/70R13
Version 2 4x108 63.4 mm — ET47 175/65R14
Version 3 4x108 63.4 mm — ET45 195/60R15

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Fiesta MK1 without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Fiesta MK8 2017–2023 Ford EcoSport 2014–2023 Ford B Max 2012–2018 Ford Fiesta MK7 2008–2017 Ford Streetka 2003–2006 Ford Focus RS 2002–2003 Ford Focus ST170 2002–2004 Ford Fusion EU 2002–2012 Ford Cougar 1999–2004 Ford Focus I 1998–2004 Ford Puma (1997) 1997–2001 Ford Ka 1996–2008 Ford Courier 1995–2000 Ford Mondeo ST200 1995–2000 Ford Mondeo 1993–2000 Ford Escort RS Cosworth 1992–1996

Will wheels from another vehicle fit your Fiesta MK1?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford Fiesta MK1?

A Ford Fiesta MK1 (1976–1983) has a PCD of 4x108: 4 studs or bolts spaced around a circle 108 mm in diameter.

Does a Ford Fiesta MK1 need a hub centric ring?

The centre bore (hub diameter) of a Ford Fiesta MK1 is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Fiesta MK1?

The recorded original offset is ET41 to ET47 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Fiesta MK1?

The specified tightening torque is 85 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Fiesta MK1?

With the same PCD (4x108) and the same centre bore (63.4 mm), these include: Ford Fiesta MK8, Ford EcoSport, Ford B Max, Ford Fiesta MK7. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.