FRENES

Ford Focus II PCD

2004–2011
VERIFIED
⌀63.4
PCD5x108
Centre bore63.4 mm
Offset (ET)ET52 to ET60
Fixing typeM12x1.5
Tightening torque130 Nm
Original tyres195/65R15, 205/55R16, 225/40R18, 235/35R19
Version européenne (la Focus américaine est en 4x108) ; écrous
Performance parts for your Ford Focus II Brakes, suspension, intake, exhaust… at STR Performance, French tuning shop. See the parts → (partner link)
Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Focus II

A Ford Focus II (2004–2011) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET52 to ET60. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 205/55R16, 225/40R18, 235/35R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm 6Jx15 ET52 195/65R15
Version 2 5x108 63.4 mm 7Jx16 ET52 205/55R16
Version 3 5x108 63.4 mm 8Jx18 ET52.5 225/40R18
Version 4 5x108 63.4 mm 8.5Jx19 ET60 235/35R19

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Focus II without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Tourneo Courier from 2023 Ford Transit Courier from 2023 Ford Mustang Mach-E from 2020 Ford Kuga III from 2019 Ford Puma (J2K) from 2019 Ford Focus IV from 2018 Ford S Max II 2015–2023 Ford Mondeo V 2014–2022 Ford Tourneo Connect 2013–2022 Ford Kuga II 2012–2019 Ford Focus III 2011–2018 Ford Grand C Max 2010–2019 Ford Kuga I 2008–2013 Ford Mondeo IV 2007–2014 Ford Edge 2006–2015 Ford Galaxy II 2006–2015

Will wheels from another vehicle fit your Focus II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford Focus II?

A Ford Focus II (2004–2011) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Ford Focus II need a hub centric ring?

The centre bore (hub diameter) of a Ford Focus II is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Focus II?

The recorded original offset is ET52 to ET60 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Focus II?

The specified tightening torque is 130 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Focus II?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Ford Tourneo Courier, Ford Transit Courier, Ford Mustang Mach-E, Ford Kuga III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.