FRENES

Ford Tourneo Connect PCD

2013–2022
VERIFIED
⌀63.4
PCD5x108
Centre bore63.4 mm
Offset (ET)ET48 to ET50
Fixing typeEcrous - 14x1.50
Original tyres205/60R16
Hub centric rings 63.4 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Tourneo Connect

A Ford Tourneo Connect (2013–2022) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET48 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm 6.5Jx16 ET50 205/60R16
Version 2 5x108 63.4 mm — ET48 205/60R16

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Tourneo Connect without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Tourneo Courier from 2023 Ford Transit Courier from 2023 Ford Mustang Mach-E from 2020 Ford Kuga III from 2019 Ford Puma (J2K) from 2019 Ford Focus IV from 2018 Ford Kuga II 2012–2019 Ford Focus III 2011–2018 Ford Grand C Max 2010–2019 Ford Kuga I 2008–2013 Ford Edge 2006–2015 Ford S Max 2006–2015 Ford Focus ST 2005–2013 Ford C Max 2003–2010 Ford Transit Connect 2003–2013 Ford Focus RS 2002–2003

Will wheels from another vehicle fit your Tourneo Connect?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford Tourneo Connect?

A Ford Tourneo Connect (2013–2022) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Ford Tourneo Connect need a hub centric ring?

The centre bore (hub diameter) of a Ford Tourneo Connect is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Tourneo Connect?

The recorded original offset is ET48 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Ford Tourneo Connect?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Ford Tourneo Courier, Ford Transit Courier, Ford Mustang Mach-E, Ford Kuga III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.