FRENES

Hyundai i30 II PCD

2012–2017
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET46 to ET53
Fixing typeM12x1.5
Original tyres195/65R15, 205/55R16, 225/45R17
GD
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai i30 II

A Hyundai i30 II (2012–2017) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET46 to ET53. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 205/55R16, 225/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Hyundai i30

Previous generation: Hyundai i30 I (2007–2012) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Hyundai i30 III (from 2017) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

i30 I 2007–2012 · 5x114.3 i30 II 2012–2017 i30 III from 2017 · 5x114.3

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 6Jx15 ET46 195/65R15
Version 2 5x114.3 67.1 mm 6.5Jx16 ET50 205/55R16
Version 3 5x114.3 67.1 mm 7Jx17 ET53 225/45R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai i30 II without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Santa Fe V from 2024 Hyundai Kona II from 2023 Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Hyundai i20 N 2021–2024 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Hyundai Tucson IV from 2020 Hyundai Nexo from 2018 Hyundai Santa Fe IV 2018–2023 Hyundai i30 III from 2017 Hyundai i30 N from 2017 Hyundai Kona 2017–2022 Hyundai Ioniq 2016–2023 Hyundai Tucson III 2015–2020 Hyundai i40 from 2011

Will wheels from another vehicle fit your i30 II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai i30 II?

A Hyundai i30 II (2012–2017) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Hyundai i30 II need a hub centric ring?

The centre bore (hub diameter) of a Hyundai i30 II is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai i30 II?

The recorded original offset is ET46 to ET53 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai i30 II?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Hyundai Santa Fe V, Hyundai Kona II, Hyundai IONIQ 6, Hyundai Stargazer. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.