Land Rover Range Rover Sport I PCD

2005–2013
VERIFIED
⌀72.6
Centre bore72.6 mm
Offset (ET)ET53
Fixing typeM14x1.5
Original tyres235/65R17, 255/55R18, 255/50R19, 275/40R20
L320, restylage 2009

Fitting wheels on a Land Rover Range Rover Sport I

A Land Rover Range Rover Sport I (2005–2013) uses a 5x120 PCD and a centre bore of 72.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x120 required. See all vehicles with 5x120.
  • Centre bore: the wheel must have a centre bore of 72.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 72.6 mm.
  • Offset: the original is ET53. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R17, 255/55R18, 255/50R19, 275/40R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Land Rover Range Rover Sport

The Land Rover Range Rover Sport I is the oldest generation in our database. Next generation: Land Rover Range Rover Sport II (2013–2022) — same 5x120 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x120 72.6 mm 7Jx17 ET53 235/65R17
Version 2 5x120 72.6 mm 8Jx18 ET53 255/55R18
Version 3 5x120 72.6 mm 9Jx19 ET53 255/50R19
Version 4 5x120 72.6 mm 9.5Jx20 ET53 275/40R20

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 72.6 mm centre bore: wheels from these vehicles bolt on and centre on a Land Rover Range Rover Sport I without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your Range Rover Sport I?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Land Rover Range Rover Sport I?

A Land Rover Range Rover Sport I (2005–2013) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Land Rover Range Rover Sport I need a hub centric ring?

The centre bore (hub diameter) of a Land Rover Range Rover Sport I is 72.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Land Rover Range Rover Sport I?

The recorded original offset is ET53 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Land Rover Range Rover Sport I?

With the same PCD (5x120) and the same centre bore (72.6 mm), these include: Land Rover Range Rover Sport III, Land Rover Range Rover V, Land Rover Defender L663, Land Rover Discovery V. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.