A Mitsubishi L200 2WD (1996–2006) uses a 6x139.7 PCD and a centre bore of 107.4 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 107.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 107.4 mm.
Offset: the original is ET27. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Vehicles with the same PCD and centre bore
Same 6x139.7 PCD and same 107.4 mm centre bore: wheels from these vehicles bolt on and centre on a Mitsubishi L200 2WD without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your L200 2WD?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 107.4 mm, and will not fit if it is smaller.
A Mitsubishi L200 2WD (1996–2006) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.
Does a Mitsubishi L200 2WD need a hub centric ring?
The centre bore (hub diameter) of a Mitsubishi L200 2WD is 107.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Mitsubishi L200 2WD?
The recorded original offset is ET27. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Mitsubishi L200 2WD?
The specified tightening torque is 130 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Mitsubishi L200 2WD?
With the same PCD (6x139.7) and the same centre bore (107.4 mm), these include: Mitsubishi Pajero Sport, Mitsubishi L400 4WD, Mitsubishi L300 4WD, Mitsubishi Pajero. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more