Mitsubishi L400 4WD PCD

1994–2007

VERIFIED

Centre bore107.4 mm

Offset (ET)ET27

Fixing typeEcrous - 12x1.50

Hub centric rings 107.4 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mitsubishi L400 4WD

A Mitsubishi L400 4WD (1994–2007) uses a 6x139.7 PCD and a centre bore of 107.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 107.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 107.4 mm.
Offset: the original is ET27. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 107.4 mm centre bore: wheels from these vehicles bolt on and centre on a Mitsubishi L400 4WD without rings. Offset, width, diameter and caliper clearance still need checking.

Mitsubishi Pajero Sport 2000–2006 Mitsubishi L200 2WD 1996–2006 Mitsubishi L200 4WD 1996–2006 Mitsubishi L300 4WD 1986–1994 Mitsubishi Pajero 1982–1999

Will wheels from another vehicle fit your L400 4WD?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 107.4 mm, and will not fit if it is smaller.

Mitsubishi Pajero Shogun ⌀67.1 Mitsubishi Pajero Wagon ⌀67.1 Mitsubishi L200 ⌀108.1 Infiniti QX80 ⌀77.8 Hyundai Staria ⌀92.5 RAM RAM 1500 ⌀77.8 GMC Sierra 1500 ⌀78.1 Holden Colorado ⌀99.5

Frequently asked questions

What is the PCD of a Mitsubishi L400 4WD?

A Mitsubishi L400 4WD (1994–2007) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Mitsubishi L400 4WD need a hub centric ring?

The centre bore (hub diameter) of a Mitsubishi L400 4WD is 107.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mitsubishi L400 4WD?

The recorded original offset is ET27. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Mitsubishi L400 4WD?

With the same PCD (6x139.7) and the same centre bore (107.4 mm), these include: Mitsubishi Pajero Sport, Mitsubishi L200 2WD, Mitsubishi L200 4WD, Mitsubishi L300 4WD. Offset, width and rim diameter still need checking for each vehicle.

Other Mitsubishi models

Eclipse Cross 5x114.3 ASX 5x114.3 i-MiEV 4x100 Lancer EVO X 5x114.3 Lancer EVO IX 5x114.3 Grandis 5x114.3 Lancer 1.3i, 1.6i 4x114.3 Outlander 5x114.3 Lancer EVO VIII 5x114.3 Lancer 2.0i 5x114.3 Airtrek 5x114.3 Lancer EVO VII 5x114.3 All Mitsubishi →

Does a value look wrong, or is a version missing? Let us know, we check every report.