FRENES

Nissan Altima PCD

1993–2001
VERIFIED
⌀66.1
PCD5x114.3 or 4x114.3
Centre bore66.1 mm
Offset (ET)ET35 to ET40
Fixing typeEcrous - 12x1.25
Tightening torque113 Nm
Original tyres215/60R16
⚠ This model comes with 5x114.3 or 4x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 66.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Altima

A Nissan Altima (1993–2001) uses a 5x114.3 or 4x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 or 4x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
  • Offset: the original is ET35 to ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 113 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x114.3 66.1 mm — ET35 —
Version 2 5x114.3 66.1 mm — ET40 215/60R16
Version 3 5x114.3 66.1 mm — — 215/60R16

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Altima without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Qashqai J12 from 2022 Nissan Townstar from 2022 Nissan Ariya from 2021 Nissan Juke II from 2019 Nissan NV300 from 2017 Nissan Murano 2015–2024 Nissan e-NV200 from 2014 Nissan Pulsar from 2014 Nissan X-Trail T32 from 2014 Nissan Qashqai J11 2013–2022 Nissan Juke I 2010–2019 Nissan Leaf 2010–2017 Nissan 370Z axe arrière 2009–2021 Nissan 370Z axe avant 2009–2021 Nissan GT-R axe arrière from 2008 Nissan GT-R axe avant from 2008

Will wheels from another vehicle fit your Altima?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Nissan Altima?

A Nissan Altima (1993–2001) can have a 5x114.3 or 4x114.3 PCD depending on the version: check on an original wheel.

Does a Nissan Altima need a hub centric ring?

The centre bore (hub diameter) of a Nissan Altima is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Altima?

The recorded original offset is ET35 to ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Altima?

The specified tightening torque is 113 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Altima?

With the same PCD (5x114.3) and the same centre bore (66.1 mm), these include: Nissan Qashqai J12, Nissan Townstar, Nissan Ariya, Nissan Juke II. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.