Nissan Maxima QX PCD

1995–2004

VERIFIED

Centre bore66.1 mm

Offset (ET)ET40

Fixing typeEcrous - 12x1.25

Tightening torque108 Nm

Hub centric rings 66.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Maxima QX

A Nissan Maxima QX (1995–2004) uses a 5x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Maxima QX without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Qashqai J12 from 2022 Nissan Townstar from 2022 Nissan Ariya from 2021 Nissan Juke II from 2019 Nissan NV300 from 2017 Nissan Murano 2015–2024 Nissan e-NV200 from 2014 Nissan Pulsar from 2014 Nissan X-Trail T32 from 2014 Nissan Qashqai J11 2013–2022 Nissan Juke I 2010–2019 Nissan Leaf 2010–2017 Nissan 370Z axe arrière 2009–2021 Nissan 370Z axe avant 2009–2021 Nissan GT-R axe arrière from 2008 Nissan GT-R axe avant from 2008

Will wheels from another vehicle fit your Maxima QX?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.1 mm, and will not fit if it is smaller.

Nissan Stagea ⌀66 Nissan Vanette Cargo ⌀66 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1 Mazda Mazda6e ⌀67.1 Suzuki E-Vitara ⌀67.1

Frequently asked questions

What is the PCD of a Nissan Maxima QX?

A Nissan Maxima QX (1995–2004) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Nissan Maxima QX need a hub centric ring?

The centre bore (hub diameter) of a Nissan Maxima QX is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Maxima QX?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Maxima QX?

The specified tightening torque is 108 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Maxima QX?

With the same PCD (5x114.3) and the same centre bore (66.1 mm), these include: Nissan Qashqai J12, Nissan Townstar, Nissan Ariya, Nissan Juke II. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Qashqai J12 5x114.3 Townstar 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 e-NV200 5x114.3 Pulsar 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.