Nissan NP300 PCD

2005–2025

VERIFIED

Centre bore100 mm

Offset (ET)ET40

Fixing typeEcrous - 12x1.25

Hub centric rings 100 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan NP300

A Nissan NP300 (2005–2025) uses a 6x139.7 PCD and a centre bore of 100 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 100 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 100 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 100 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan NP300 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Terrano II 1994–2007 Nissan Urvan 1987–1995 Nissan Urvan King 1987–1995

Will wheels from another vehicle fit your NP300?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 100 mm, and will not fit if it is smaller.

Nissan Armada ⌀78.1 Nissan Pickup King Cab ⌀100.3 Nissan Titan ⌀78.1 Nissan Navara ⌀108 Nissan Patrol GR ⌀110 Nissan Patrol ⌀78.1 Nissan Pathfinder ⌀66.1 Infiniti QX80 ⌀77.8

Frequently asked questions

What is the PCD of a Nissan NP300?

A Nissan NP300 (2005–2025) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Nissan NP300 need a hub centric ring?

The centre bore (hub diameter) of a Nissan NP300 is 100 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan NP300?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Nissan NP300?

With the same PCD (6x139.7) and the same centre bore (100 mm), these include: Nissan Terrano II, Nissan Urvan, Nissan Urvan King. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Qashqai J12 5x114.3 Townstar 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 e-NV200 5x114.3 Pulsar 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.