Nissan Titan PCD

from 2003

VERIFIED

Centre bore78.1 mm

Offset (ET)ET25

Fixing typeEcrous - 12x1.25

Tightening torque140 Nm

Original tyres265/70R18

Hub centric rings 78.1 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Titan

A Nissan Titan (from 2003) uses a 6x139.7 PCD and a centre bore of 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
Offset: the original is ET25. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 265/70R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 78.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Titan without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Armada from 2004 GMC Sierra 1500 from 2010 Infiniti QX56 2004–2013 Chevrolet Astro 4WD from 2003 Chevrolet Avalanche 2001–2006 Cadillac Escalade 1999–2006 Chevrolet Silverado 1999–2005 Chevrolet Tahoe 1996–2005 Chevrolet C,K 1988–2010 GMC Safari 1985–2002

Will wheels from another vehicle fit your Titan?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Nissan Titan?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Nissan Patrol 1987–1997 Wheels from Cadillac Escalade 1999–2006

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 78.1 mm, and will not fit if it is smaller.

Nissan NP300 ⌀100 Nissan Pickup King Cab ⌀100.3 Nissan Navara ⌀108 Nissan Patrol GR ⌀110 Nissan Terrano II ⌀100 Nissan Patrol ⌀110 Nissan Urvan ⌀100 Nissan Urvan King ⌀100

Frequently asked questions

What is the PCD of a Nissan Titan?

A Nissan Titan (from 2003) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Nissan Titan need a hub centric ring?

The centre bore (hub diameter) of a Nissan Titan is 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Titan?

The recorded original offset is ET25. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Titan?

The specified tightening torque is 140 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Titan?

With the same PCD (6x139.7) and the same centre bore (78.1 mm), these include: Nissan Armada, GMC Sierra 1500, Infiniti QX56, Chevrolet Astro 4WD. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Qashqai J12 5x114.3 Townstar 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 e-NV200 5x114.3 Pulsar 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.