FRENES

Nissan Patrol PCD

1987–1997
VERIFIED
⌀110
PCD6x139.7
Centre bore110 or 78.1 mm
Offset (ET)ET10 to ET35
Fixing typeEcrous - 12x1.25
Tightening torque130 Nm
Original tyres235/80R16, 265/70R18
Hub centric rings 110 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Patrol

A Nissan Patrol (1987–1997) uses a 6x139.7 PCD and a centre bore of 110 or 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x139.7 required. See all vehicles with 6x139.7.
  • Centre bore: the wheel must have a centre bore of 110 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 110 mm.
  • Offset: the original is ET10 to ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/80R16, 265/70R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x139.7 110 mm — ET30 —
Version 2 6x139.7 110 mm — ET10 235/80R16
Version 3 6x139.7 78.1 mm — ET35 265/70R18

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 110 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Patrol without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Patrol GR 1997–2010 Kia Bongo from 2000 Kia Pregio from 2000 Ssang Yong Korando 1997–2001 Ssang Yong Musso 1993–2005 Isuzu Campo 2WD 1988–2003 Isuzu Campo 4WD 1988–2003 Opel Campo 2WD 1988–2003 Opel Campo 4WD 1988–2003 Isuzu Trooper 1981–1991

Will wheels from another vehicle fit your Patrol?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Nissan Patrol?

A Nissan Patrol (1987–1997) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Nissan Patrol need a hub centric ring?

The centre bore (hub diameter) of a Nissan Patrol is 110 or 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Patrol?

The recorded original offset is ET10 to ET35 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Patrol?

The specified tightening torque is 130 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Patrol?

With the same PCD (6x139.7) and the same centre bore (110 mm), these include: Nissan Patrol GR, Kia Bongo, Kia Pregio, Ssang Yong Korando. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.