Nissan Sunny B11 PCD

1982–1986

VERIFIED

Centre bore66.1 mm

Offset (ET)ET40

Fixing typeEcrous - 12x1.25

Tightening torque110 Nm

Hub centric rings 66.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Sunny B11

A Nissan Sunny B11 (1982–1986) uses a 4x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Sunny B11 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Evalia from 2012 Nissan NV200 from 2010 Nissan Tiida from 2007 Nissan Versa from 2007 Nissan Cube 2002–2008 Nissan Almera N16 2000–2006 Nissan Sentra 2000–2006 Nissan Primera P11 1996–2002 Nissan Altima 1993–2001 Nissan Primera P10 1990–1996 Nissan 200SX S13 1989–1994 Nissan Laurel 1985–1989 Nissan 300ZX Z31 1984–1990 Nissan Bluebird 1983–1998 Nissan Prairie 1983–1988 Nissan Cherry 1979–1987

Will wheels from another vehicle fit your Sunny B11?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.1 mm, and will not fit if it is smaller.

Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1 Chevrolet Evanda ⌀56.6 Kia Cerato ⌀67.1 Mitsubishi Lancer 1.3i, 1.6i ⌀67.1 Chevrolet Lacetti ⌀56.6 Chevrolet Rezzo ⌀56.6

Frequently asked questions

What is the PCD of a Nissan Sunny B11?

A Nissan Sunny B11 (1982–1986) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Nissan Sunny B11 need a hub centric ring?

The centre bore (hub diameter) of a Nissan Sunny B11 is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Sunny B11?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Sunny B11?

The specified tightening torque is 110 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Sunny B11?

With the same PCD (4x114.3) and the same centre bore (66.1 mm), these include: Nissan Evalia, Nissan NV200, Nissan Tiida, Nissan Versa. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Qashqai J12 5x114.3 Townstar 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 e-NV200 5x114.3 Pulsar 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.