RAM Promaster PCD

from 2013

VERIFIED

Centre bore78.1 mm

Offset (ET)ET68

Fixing typeEcrous - 16x1.50

Tightening torque120 Nm

Original tyres215/75R16

Hub centric rings 78.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a RAM Promaster

A RAM Promaster (from 2013) uses a 5x130 PCD and a centre bore of 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
Offset: the original is ET68. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 16x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 78.1 mm centre bore: wheels from these vehicles bolt on and centre on a RAM Promaster without rings. Offset, width, diameter and caliper clearance still need checking.

Maxus EV80 Plus from 2022 Maxus EV80 Pro from 2022 Maxus EV80 2015–2023 Laika X650R 2007–2014 Laika X660R 2007–2014 Peugeot Boxer Maxi from 2006 Citroen Jumper Maxi 1994–2006 Citroen Relay Maxi 1994–2006 Fiat Ducato Maxi 1994–2006

Will wheels from another vehicle fit your Promaster?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a RAM Promaster?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Maxus EV80 Plus from 2022 Wheels from Maxus EV80 Pro from 2022 Wheels from Maxus EV80 2015–2023 Wheels from Peugeot Boxer Maxi from 2006

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 78.1 mm, and will not fit if it is smaller.

Mercedes G-Classe W465 ⌀84.1 Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6 Lamborghini Urus axe arrière ⌀71.6 Lamborghini Urus axe avant ⌀71.6

Frequently asked questions

What is the PCD of a RAM Promaster?

A RAM Promaster (from 2013) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a RAM Promaster need a hub centric ring?

The centre bore (hub diameter) of a RAM Promaster is 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a RAM Promaster?

The recorded original offset is ET68. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a RAM Promaster?

The specified tightening torque is 120 Nm for Ecrous - 16x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a RAM Promaster?

With the same PCD (5x130) and the same centre bore (78.1 mm), these include: Maxus EV80 Plus, Maxus EV80 Pro, Maxus EV80, Laika X650R. Offset, width and rim diameter still need checking for each vehicle.

Other RAM models

RAM 700 Pickup 4x98 Promaster City 5x98 RAM 1500 5x139.7 RAM 2500 Pickup 8x165.1 RAM 3500 Pickup 8x165.1 All RAM →

Does a value look wrong, or is a version missing? Let us know, we check every report.