Subaru Impreza WRX STi PCD

2000–2005
VERIFIED
⌀56.1
Centre bore56.1 mm
Offset (ET)ET53 to ET55
Fixing typeEcrous - 12x1.25
Tightening torque120 Nm
Original tyres225/45R17, 225/50R17
⚠ This model comes with 5x114.3 or 5x100 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Fitting wheels on a Subaru Impreza WRX STi

A Subaru Impreza WRX STi (2000–2005) uses a 5x114.3 or 5x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 or 5x100 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET53 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/45R17, 225/50R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 56.1 mm — ET53 225/45R17
Version 2 5x114.3 56.1 mm — ET53 225/45R17
Version 3 5x114.3 56.1 mm — ET55 225/50R17

Will wheels from another vehicle fit your Impreza WRX STi?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Subaru Impreza WRX STi?

A Subaru Impreza WRX STi (2000–2005) can have a 5x114.3 or 5x100 PCD depending on the version: check on an original wheel.

Does a Subaru Impreza WRX STi need a hub centric ring?

The centre bore (hub diameter) of a Subaru Impreza WRX STi is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Subaru Impreza WRX STi?

The recorded original offset is ET53 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Subaru Impreza WRX STi?

The specified tightening torque is 120 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Subaru Impreza WRX STi?

With the same PCD (5x114.3) and the same centre bore (56.1 mm), these include: Subaru Crosstrek, Subaru Ascent, Subaru Levorg, Subaru WRX STI. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.