Subaru Forester PCD

1997–2002
VERIFIED
⌀56.1
Centre bore56.1 mm
Offset (ET)ET48
Fixing typeEcrous - 12x1.25
Tightening torque100 Nm
Original tyres205/70R15, 215/65R16, 225/60R17
⚠ This model comes with 5x100 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Fitting wheels on a Subaru Forester

A Subaru Forester (1997–2002) uses a 5x100 or 5x114.3 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 or 5x114.3 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/70R15, 215/65R16, 225/60R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 56.1 mm — ET48 205/70R15
Version 2 5x100 56.1 mm — ET48 215/65R16
Version 3 5x114.3 56.1 mm — ET48 225/60R17

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Subaru Forester without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your Forester?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Subaru Forester?

A Subaru Forester (1997–2002) can have a 5x100 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Subaru Forester need a hub centric ring?

The centre bore (hub diameter) of a Subaru Forester is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Subaru Forester?

The recorded original offset is ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Subaru Forester?

The specified tightening torque is 100 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Subaru Forester?

With the same PCD (5x100) and the same centre bore (56.1 mm), these include: Subaru BRZ, Subaru XV, Subaru Baja, Subaru Impreza WRX STi. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.