A Suzuki Gand Vitara (1998–2005) uses a 5x139.7 PCD and a centre bore of 104.5 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 104.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 104.5 mm.
Offset: the original is ET5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25, tightened to 95 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/70R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 5x139.7 PCD and same 104.5 mm centre bore: wheels from these vehicles bolt on and centre on a Suzuki Gand Vitara without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your Gand Vitara?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 5x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 104.5 mm, and will not fit if it is smaller.
A Suzuki Gand Vitara (1998–2005) has a PCD of 5x139.7: 5 studs or bolts spaced around a circle 139.7 mm in diameter.
Does a Suzuki Gand Vitara need a hub centric ring?
The centre bore (hub diameter) of a Suzuki Gand Vitara is 104.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Suzuki Gand Vitara?
The recorded original offset is ET5. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Suzuki Gand Vitara?
The specified tightening torque is 95 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Suzuki Gand Vitara?
With the same PCD (5x139.7) and the same centre bore (104.5 mm), these include: Suzuki XL7. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more