FRENES

Suzuki Jimny PCD

1984–1997
VERIFIED
⌀108.4
PCD5x139.7
Centre bore108.4 mm
Offset (ET)ET5
Fixing typeEcrous - 12x1.25
Tightening torque95 Nm
Original tyres205/70R15, 195/80R15
Hub centric rings 108.4 mm → Wheel spacers 5x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Suzuki Jimny

A Suzuki Jimny (1984–1997) uses a 5x139.7 PCD and a centre bore of 108.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x139.7 required. See all vehicles with 5x139.7.
  • Centre bore: the wheel must have a centre bore of 108.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 108.4 mm.
  • Offset: the original is ET5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 95 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/70R15, 195/80R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x139.7 108.4 mm — ET5 205/70R15
Version 2 5x139.7 108.4 mm — ET5 195/80R15

Vehicles with the same PCD and centre bore

Same 5x139.7 PCD and same 108.4 mm centre bore: wheels from these vehicles bolt on and centre on a Suzuki Jimny without rings. Offset, width, diameter and caliper clearance still need checking.

Suzuki Vitara 1988–1998

Will wheels from another vehicle fit your Jimny?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Suzuki Jimny?

A Suzuki Jimny (1984–1997) has a PCD of 5x139.7: 5 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Suzuki Jimny need a hub centric ring?

The centre bore (hub diameter) of a Suzuki Jimny is 108.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Suzuki Jimny?

The recorded original offset is ET5 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Suzuki Jimny?

The specified tightening torque is 95 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Suzuki Jimny?

With the same PCD (5x139.7) and the same centre bore (108.4 mm), these include: Suzuki Vitara. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.