Suzuki Vitara PCD

1988–1998
VERIFIED
⌀108.1
Centre bore108.1 or 108.4 or 60.1 mm
Offset (ET)ET25 to ET50
Fixing typeEcrous - 12x1.25
Tightening torque95 Nm
Original tyres205/70R16, 215/60R16
⚠ This model comes with 5x139.7 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Fitting wheels on a Suzuki Vitara

A Suzuki Vitara (1988–1998) uses a 5x139.7 or 5x114.3 PCD and a centre bore of 108.1 or 108.4 or 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x139.7 or 5x114.3 required. See all vehicles with 5x139.7.
  • Centre bore: the wheel must have a centre bore of 108.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 108.1 mm.
  • Offset: the original is ET25 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 95 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/70R16, 215/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x139.7 108.1 mm — ET25 205/70R16
Version 2 5x139.7 108.4 mm — ET25 —
Version 3 5x114.3 60.1 mm — ET50 215/60R16

Will wheels from another vehicle fit your Vitara?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Suzuki Vitara?

A Suzuki Vitara (1988–1998) can have a 5x139.7 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Suzuki Vitara need a hub centric ring?

The centre bore (hub diameter) of a Suzuki Vitara is 108.1 or 108.4 or 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Suzuki Vitara?

The recorded original offset is ET25 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Suzuki Vitara?

The specified tightening torque is 95 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Suzuki Vitara?

With the same PCD (5x139.7) and the same centre bore (108.1 mm), these include: Suzuki Grand Vitara, Chevrolet Tracker, Daihatsu Feroza. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.